AQUALINE PLUMBING, ELECTRICAL & Heating LLC

aqualine plumbers electricians heating Bellevue WA

CALL US TODAY ON:

(425) 943-9624

Location:

Bellevue, WA

Tips To Assist Lower Your Heating Bills This Winter Season

9/26/2018

Prepping your house for winter season is all about the energy efficiency, so the heater does not need to work as harder to keep it toasty and nice inside. Give the entire place a great pass prior to the temperatures drop really and your heating bills will thank you, and so will the appliances, walls, and windows. It's broadly a very basic annual maintenance to tighten up a pain point in the home. You possibly already know a few tricks for battening the hatches inside down, but did you knew that it is just as imperative to take the pass outside? "Your house’s exterior assists keep indoors warm and toasty during colder months. Here is how to make your winter house as energy effective as possible.

Insulate roof. It may not be the very first thing that you think about, but insulating the roof is the most cost-effective method to keep the heat from escaping as well as cool air from coming in. Think about it as winter hat for the house. This step could be as straightforward as ensuring that insulation in your attics is in great shape below it for additional protection.You can also call Bellevue Heating to know further details.

Check siding. You cannot actually insulate your current siding—it is more about buying a siding with great insulation when you construct the home—but what you could do is check out for problem areas: rotten area on wood siding, crack where that heated air you are paying for inside may be escaping, or caulking that is cracked or shrunken over time.

Clean gutters. Cleaning the dirt, leaves, twigs, and other debris from your gutters prior to the first snowfall can help avoid ice dams that can clog the gutters and damage the roof.

Heating Bellevue

Assess your doors and windows. Pick up a caulk can on your way back home today to fill up any holes or cracks in the window and door frames (check inside and outside ), and utilize weather stripping tapes on all severely problematic regions. Change the screen if you’ve storm windows. What is that? Your door does not shut totally? It is time to probably replace it.

Check chimney. Any flammable substance known as creosote can easily build up in chimneys above the wood-burning fires. Therefore before you begin lighting yours again, get the chimney cleaned—annually.

Hang curtains. If, after calking even, any windows or doors generate a draft inside, then you can combat it always with heavy curtain or other window treatment.

Change filters in your heating system. One of the most excellent ways to lower the heating bills and that you actually should be having it performed once a month in heavy-use periods such as winter is changing the filters. Dirty, clogged filters can make your heating system work harder, resulting in potential damages and increased energy bill. Routine maintenance—checkup on entire system every year—also is encouraged.

Clean the fridge coils. On the bottom or back of your fridge tends to be a set of the "condenser coils"—these look a bit as intricate grill grate—which cools the air in by releasing the heat from compressor. Therefore, if they are dirty, fridge will need to work harder in order to stay cool. So clean them, utilizing a coil brush or vacuum to dislodge food, dirt, pet hair, and the other gross stuff which adding points to the heating bills.

Deep clean lint trap on the dryer. The lint brush can make fast work of this as well as will ensure that dryer works as effectively as possible.

Importance Of Yearly Furnace Maintenance

9/23/2018

Have you scheduled yearly furnace safety check? You may shrug off this job, but it is more imperative than you believe. Once you learn all in and out of yearly furnace system maintenance, then you will not put it off.

Why Is Yearly Maintenance So Imperative?
The aim of preventative maintenance of furnace is to keep the system up and working all season long without surprise breakdown, while operating at peak efficiency. You see your heating system face to face rarely, so it’s simple to forget and neglect it. Think of doing same thing with your car. In case you never get oil changed or you refuse to take the car in for tune-up until check-engine’s light comes on, then you cannot expect it to ever last over 2-3 years.

Your heating unit is same way. Regardless of how costly the unit is or what manufacturer promises you, a complex piece of any mechanical equipment is subjected to breakdowns and requires repairs very often. Decrease the incidence of repair by keeping on the top of yearly maintenance by professional Heating Bellevue.

Advantages of Yearly Furnace Maintenance
What could you expect from a newly tuned-up unit? Is cost of maintenance worth it really? You must consider that a few benefits of routine maintenance are instant while others avoid future issues from developing. A few of the most noticeable benefits include:

  • Low energy bills: You may assume that since your equipment is heating your house without any apparent issue that all is fine. But, have you taken look at the energy bills recently? A neglected system loses its ability slowly to keep your house comfortable at same levels of efficiency it did once. Just as car tune-up offers better gas mileage, the furnace consumes lesser fuel after getting professional maintenance.​

Heating Bellevue

  • Lesser repairs: Do you ever hear an odd sound or find a strange odour coming out from your furnace? Contacting for a maintenance right away can help catch issues before they become catastrophic. For instance, a fraying belt can lead to strange operating noise. If a professional replaces it on time, you can then avoid the expensive repairs that results from snapped belt that is whipping around inside. Just by preventing any future repairs, yearly maintenance pays out for itself easily.
  • Lower chances of catastrophic breakdowns: Everybody wants incident-free heating seasons. After all, it is incredibly uncomfortable and inconvenient when equipment breaks on a frigid cold night, just when you require your furnace the most. The chances of this occurring whenever you schedule inspection every year are diminished greatly.
  • Longer life of equipment: Furnaces and other equipment of heating work best when they are serviced and cleaned regularly. One malfunctioning component can cause domino effect that make the whole system to break. Regular maintenance avoids this from taking place and adds many years to the equipment’s life.
  • Safer equipment functioning: A failing heating system does much more than costing a lot of wealth to fix; it can also endanger your family’s life. For example, if the heating system develops crack in heat exchanger, then carbon monoxide gas will escape and poison air you breathe in. Also, electric heating systems can grow a short circuit, and that tends to be a very serious fire hazard when ignored. Clearly, the family’s safety and security is another reason to fix yearly heating system maintenance.
  • Improved Safety: A well maintained, clean fuel burning appliance generates a minuscule quantity of carbon monoxide, typically carried far by venting system. But, a system which is malfunctioning or dirty can produce high concentrations of this odourless, deadly gas, posing threat to occupants in your house. As a part of your own heating maintenance plan, technician will inspect burner combustion, heat exchanger, and gas connections, to ensure all the parts are in great working order.

Why Your Heating Unit Does Not Turn On At All?

9/20/2018

When it is cold outside, you want your heating unit to work properly. Whether you are using a gas furnace or a heat pump, a broken equipment means that it is time to pull the space heaters out, put on jackets, and experience lots of discomfort until at least your HVAC guys show up.

However, why does not your heater turn on? What is keeping your unit from working appropriately – and how severe is the issue? Let’s find out:

Lack Of Maintenance
This probably is the main source of your heating unit not turning on during winters. It is the most probable reason your heating unit won’t just turn on. More frequently than not, the issue is that the furnace/heating unit is just dirty:

The solution? Have your HVAC expert clean your unit every year! Yearly maintenance pays for itself ultimately because you will not need to deal with discomfort or inconvenience of a non-working furnace/heating unit.

Too Much Gas
The furnace manufacturers have specs actually for how much of gas their equipment must burn. Basically, you have to calibrate the unit during installation to ensure it works appropriately. Otherwise, it may stop working suddenly at an inconvenient time.

When it is less than 20 degree outside. And wind is howling. And icy.

Sometimes, an improperly calibrated furnace burns too much of gas. When this occurs over a long time period, two main things can occur:
You’ll overpay for the gas during winter
Your furnace overheats, making it to cycle out on limit switch

Dead Blower Capacitor
The capacitor starts a furnace when thermostat setting makes it turn on. Capacitors possess tolerance levels. If the tolerance is below certain level, the blower may not achieve the right RPM. In a few cases, capacitor just will not start the blower. What can be the worst scenario? A completely dying capacitor leading to blower malfunction, which really is a costly repair.

Heating Bellevue

Low Refrigerant Level
Heating a house with heat pump? In case you’re, it is possible for refrigerant level to become a bit very low. When this happens, the heat strips may come on more frequently than you wish them to.

And all of us know that heat strip can result in exorbitant utility bills, which isn’t good.

If you find the heat strips coming with increasing frequency, then it may be time to boost your refrigerant charge. And if level is very low for very long, the compressor may overheat and fail down. So, always keep your eye on auxiliary/strips heat status in winter.

Dead Starting Components
All types of components can become bad for a lot of reasons. In particular, failed starting components, can avoid your blower or the outdoor unit from properly starting. The system will not heat your house, and you will need to replace bad parts.

Again, regular inspection and proper maintenance can assist you identify issues with such components prior to they fail. You will avoid expensive repairs in future.

Cracked Heat Exchanger
The cracked heat exchanger will not always result in furnace failure –not right away at least. Still, let’s have a look at it because:

It could impact efficiency of your unit, which you may notice when it becomes bad enough.

The cracked heat exchanger sometimes is indicative of another issue that can cause your furnace/heating unit to fail, such as low airflow because of dirty components,so its its high time to call Heating Bellevue.

If you have got cracked heat exchanger, then you should replace it at the earliest as it is quite dangerous.

What Should You Do After A Short Circuit?

8/24/2018

A short circuit is a result of two different wires connecting with each other giving the electricity passing less resistance. In simpler terms, a short circuit is a result of two conductive wires working very close by, giving less resistance and more heat due to less distance. For example, a wire passing current touches a working switch, the touch would create less resistance for the current to pass, result in heat, and eventually in a short circuit. A short circuit is generally identified by sparks or flames or smoke.

A short circuit can be caused by various reasons. Such as:

  • Old or faulty wiring can lead to a short circuit. If these wires touch a working wire, it can cause a short circuit. Keep maintaining and rewiring to avoid such short circuits. It also helps save money for future and is a very precautious measure.
  • Loose wiring can allow a neutral and a live, working wire to touch, leading to lesser resistance, and a short circuit. Wiring should be checked upon and maintained regularly to avoid short circuits. It should be seen that there are no open and hanging wires left about.
  • Insects and animals like rats, mice, rodents, squirrels, often tend to cut or chew on wires. The chewed upon or cut wires can cross another and lead to a short circuit. Ensure on a regular basis that the wires are in a good conditions, and keep away the insects and animals by using various household methods.
  • Old devices and appliances can also cause short circuits. The main sources of their shorts are power plugs, power cords, or the device or appliance itself. Keep checking up on the appliances to ensure they work as new and if they need some kind of maintenance.

Electrician Bellevue

You can always know the causes behind a short circuit, or even how to avoid it. But what happens when a short circuit takes place? What should you do during a short circuit?

  • Check the breaker for a flip. If a short circuit happens, breakers tend to trip. The switch would flip in the opposite direction of other breakers when a short circuit takes place.
  • Check the power cords. If you find any of them damaged or its plastic melted, then the short circuit most probably took place inside the appliance or device.
  • Turn the power off. Turn the main switch off. Unplug all devices and appliances on the affected circuit. Label the breakers with identification of rooms and appliances they harbor as well from before. This makes it easy to understand which breaker in the house is faulty.
  • If you find your breaker flipped, flip it in the opposite direction again. If it flips back over, possibilities are, the short circuit can be in the breaker itself.
  • Try troubleshooting your breakers. Keep switching the switches until your breaker trips again. That switch is most probably the reason behind your short circuit.
  • Check the device. If the switches don’t make the breaker trip, then try plugging the devices back and try troubleshooting again. If the breaker flips now, then the short circuit might be in your device.
  • If nothing works, call a professional electrician.
Short circuit can be very dangerous and fatal. It is very necessary to take action against it. It can be caused by various factors, such as old, faulty, or loose wiring, insects and animals, and old devices or appliances. If a short circuit happens, check the breaker for a flip, check the power cords, turn the power off, try troubleshooting, or check the appliances. If you still cannot find a solution, call Electrician Bellevue.

Benefits Of Bathroom Remodelling Projects

8/13/2018

A bathroom is a homeowner’s possession of both style and substance. It should be enough beautiful to have a pleasant bathroom’s experience and enough useful to justify splurge on design or complete overhaul. It’s one among the most frequently visited places in the home other than the bedroom and living room. Are you thinking to take up a bathroom remodeling work to enhance your current bathroom’s condition? It’s a challenge but below are a few benefits for you whenever you undertake this kind of work.

  • You can fit the bathroom requirements like a glove. Bathroom remodeling is an opportunity for you to begin over with setting your bathroom. It is a fresh beginning which will let you to re-evaluate your earlier bathroom and see what changes you wish to introduce as your wants and needs, and how to include both without slashing a lot in your budget.
  • Bathroom remodeling costs less than professional customization services. There definitely will be cost saving for you in case you remodel the bathroom and turn your bathroom into your do it yourself project. You’ve more control over the raw materials’ costs and manual labor which you place on it and this will offset any professional payments you will need to shell out in case you hire somebody to do your whole redesigning and remodelling.
  • You could design the bathroom as per your unique needs. Here are a few examples of specific accessibility needs that Plumber Bellevue can take up with the assistance of bathroom remodeling projects – grab power lifts and bars for helping the bathroom users with weaker joints, doorways that adequately fit wheelchairs, low sinks with motion sensor for the comfort and ease of elderly users and children, and added sanitation features which can be of highest advantage to people with weaker immune system.

Plumber Bellevue

  • You can adapt bathroom inspiration to DIY projects. Do you find movie-like freestanding bathtubs more in agreement with your style inspiration compared to the wall-attached and alcove common bath tub which you’ve at your house? With bathroom remodeling projects, you can adapt such inspirations you have found in websites, movies, and other resources as well as finally make those dreams a reality. A few good resources for assisting you visualize your own dream bathroom include the magazine articles on interiors and bathroom, along with Pinterest boards of people who have also successfully remodeled their bathrooms.
  • You are involved more with included elements to preferred bathroom design. All about showers, sinks, bathtubs, toilets, bidets, lighting, walls, cabinets, ceilings, heating, flooring, and ventilation options now can be decided with much more scrutiny. You will gain more control over what is in the bathroom and ways to maintain them. No longer you will need to worry on not knowing what any element is made up of and be astonished that it will suddenly break down. With your complete involvement, you’ve a more precise quote of how long the things will actually last and how can you best maintain those elements in top shape.
  • You can introduce upgrades and accessories generously. Possibly you’re more into technological advancements and wish to try out jetted bath tub which comes with water massager. This now is your opportunity to turn the old bathroom in a smarter bathroom which has all cool features you won’t otherwise have in case you didn’t do the bathroom remodeling job.
  • You can demolish and remove unpleasant and worn out elements. The most common benefit is the bathroom will become as great as a new one after a bathroom remodeling project. Some things you can get rid of finally during bathroom remodeling project: faulty sink plumbing, corroded bolts and nuts in the toilet bowl and their plumbing fixtures, malfunctioning spouts and shower handles, ugly shower stall, and shower base and flooring dying to have a little intervention for long time.

How To Fix Running Toilets?

8/6/2018

A very high water bill can be because of running toilets which require repairs. One among the worst causes of wasting water, a toilet with some leaks, can add additional $1,000 every year to the water bill. And toilets with major leakage can cost an additional $2,000 yearly! If you wish to learn about how to stop running toilets, read on to find out how to troubleshoot as well as fix your toilets to stop this water waste instantly.

Is Your Toilet Running Constantly?
A toilet which runs continually can waster lots of water every day and even adds to the costs of your water bills. If you aren’t sure whether the toilet is running always, there are two tests that can help you to decide if it’s leaking.

  • The Dye Test: You may use food colouring or dye tablet for this test. Simply remove lid from the toilet tank and drop a tablet or few drops of the food coloring in water. Wait for about 15 to 20 minutes and then check your toilet bowl for presence of dye. If dye is visible in the bowl, you then have a leaking toilet tank.
  • Sound Check: It’s an easy one. Walk up to the toilet and carefully listen to it. The leak will generate a hissing sound. The stuck flapper will provide you sound of continuously running water.

A popular source of running toilet is old or faulty flapper, which may become brittle or even break down from minerals and chlorine in water, leading to a poor seal. One more reason is because attached chain is very long and it gets caught under flapper whenever you flush. If the chain is very long, shorten it using wire snippers.

Inspecting Inner Workings of Your Toilet
Another key parts of the toilet tank are flush and fill valves. Fill valve is linked to incoming water lines and frequently has a float which cuts the water flow off once the whole tank is filled up to desired levels. The flush valve tends to be at center of tank and enables water to leave tank.

Plumber Bellevue

Whenever you activate flush handle, it will raise the flapper, which lets the water to quickly flow through flush valve and in the toilet bowl, thus washing away any wastes. If any among these parts isn’t working appropriately, it can enable water to leak out from the tanks, increasing the costs of water for business or home.

Too Much Of Water: If the tank overfills, it might pour water down your flush tube just after it’s filled. Water must remain half inch to only one inch below top of flush tube once tank is full. In case it’s filling above tube, you should adjust the water levels of tank by adjusting float on fill valve or call Plumber Bellevue.

There’s more than one kind of float valve situated on toilets but a rule stays the same, regardless of the kind: If you raise float, you raise water level in tank. In case you lower float, you lower water level also in your tank.

Fill Valve, Gone Bad: If the toilet has passed the aforementioned inspections however is running still, then it might have a poor fill valve. In case you are handy, then you should be capable to make the repair for a very reasonable price.

Other Causes of Higher Water Bill
Now that your toilet is repaired, you should look for other leakages around the house and you might be capable to save more on the water bills. Leaky faucets, pipes, and irrigations systems all can contribute to the costs of water.

Contact Us:

*

Indicates required field

Submit